When HN users recommended it
1 HN user recommended this in 2019, in one comment.
20072026
Each tall tick is one HN user's first recommendation. A short tick is the same user again. Click a tick to jump to the comment.
Port Rs232 Multiport Serial Card
Amazon's catalog no longer lists this product (checked 2026-11-02). The name comes from the link HN users posted.
Ok, it sounds like what you were trying to do wasn't routing, but circuit-switching the rs232 lines.
As an alternative, PPP gives you a routed TCP/IP connection over a serial line...you offload routing onto the network layer and you can potentially have _all_ your client machines communicate with each other or even externally via standard TCP networking, and don't deal with circuit-switching the serial connections at all. For things that are TCP capable this is probably the cleanest solution.
If you want to support software that requires direct serial/modem links and not TCP, you will need something else in the mix. On the software side, I'd check the software to make sure you can't just turn off the AT commands altogether and use raw serial. Even where it wasn't a supported/intended setup, most software that explicitly handled modems allowed specifying alternate AT command strings, so you _might_ be able to just blank them out and go straight to serial. As far as circuit-switching...I know I've seen hardware devices that did this, but not in decades, so likely not easy to find any more. A quick google only turned up a bunch of datasheets for chips that could do it, but seems like you'd have to build your own device or track down a vintage device.
For multiport cards, an amazon search turned this up as the first result: https://www.amazon.com/Port-Rs232-Multiport-Serial-Card/dp/B...